This article is specifically written to answer the geometry question: "What is the radius of a circle drawn in the space between a circle of radius 1 unit, and the corner of the enclosing square?" To better explain the question, and then answer it, I have drawn the diagram shown below. The question states that the radius of the larger circle is 1 unit of length, and that it is enclosed in a square. What is the radius of the smaller circle drawn in the space in the corner region? (The question was asked in a GCSE workbook, aimed for children aged 14-16, although the geometry and algebra became more complicated than I had expected.

By symmetry, the angle at A = 45 degrees, so triangles ACG and AEH are right-angled isosceles triangles.

AH and EH are equal to the radius of the larger circle = 1 unit

By Pythagoras' Theorem, length AE = √2

Length AD = AE - DE = √2 -1

However, length AD is not the diameter of the smaller circle. The diameter of the smaller circle is BD, not AD. We are still making progress, nonetheless.

Next, consider the ratio of the lengths AD:AF.

AD = √2 -1 as we showed earlier

AF = AD + DF = (√2 -1) + 2 (the diameter of the circle) = √2 + 1

So the ratio AD:AF = √2 -1 : √2 + 1

And the fraction AD/AF = √2 -1 / √2 + 1

Having combined all terms over the same denominator, we can now simplify (√2 -1)(√2 +1), since (a+b)(a-b) = a^2 - b^2

BD is the diameter of the smaller circle, BD = 0.216... Comparing this with the diameter of the larger circle, which is 2.00, we can see that the smaller circle is around 10% of the diameter of the larger one. This surprised me - I thought it was larger.

In future posts, I'll look at other arrangements of circles in corners - in particular the quarter-circle in the corner (which, as a repeating pattern, would lead to a smaller circle touching four larger circles in a square-like arrangement), and a third-of-a-circle in the corner of a hexagon. I'll then compare the two arrangements (in terms of space filled) and also check against any known alloys, looking at the ratios of diameters to see if I can find a real-life application.

The diagram isn't perfect, but I'm better at using a pencil and compasses than I am with drawing geometric shapes in Photoshop. The larger circle has centre E, and DE = EF = 1 unit. What is the radius of the smaller circle, with centre C (BC = CD = smaller radius).

By symmetry, the angle at A = 45 degrees, so triangles ACG and AEH are right-angled isosceles triangles.

AH and EH are equal to the radius of the larger circle = 1 unit

By Pythagoras' Theorem, length AE = √2

Length AD = AE - DE = √2 -1

However, length AD is not the diameter of the smaller circle. The diameter of the smaller circle is BD, not AD. We are still making progress, nonetheless.

Next, consider the ratio of the lengths AD:AF.

AD = √2 -1 as we showed earlier

AF = AD + DF = (√2 -1) + 2 (the diameter of the circle) = √2 + 1

So the ratio AD:AF = √2 -1 : √2 + 1

And the fraction AD/AF = √2 -1 / √2 + 1

What is the remaining distance between the circle and the origin?

Look again at the larger circle, and the ratio of the diameter to the distance from the corner to the furthest point on the circle?
The fraction AB/AD is equal to the fraction AD/AF. This fraction describes the relationship between the diameter of a circle and the additional distance to the corner of the enclosing square. The diameter of the circle is not important, the ratio is fixed.

So we can divide the shorter length AD in the ratio AD:AF, and this will give us the length AB and (as we already know AD) the diameter of the smaller circle, BD.

To express it more simply and mathematically: AD/AF = AB/AD

Substituting known values for AD and AF, this gives:

AD/AF = AB/AD

(AD^2) / AF = AB

(√2 -1)^2 / (√2 + 1) = AB

Evaluating:

(√2 -1)^2 = 3 - 2 √2 = 0.17157...

and:

(√2 + 1) = 2.4142...

Now: BD (diameter or circle) = AD ('corner' of larger circle) - AB ('corner' of small circle)

Substituting values for AD and AB, and then combining terms over the same denominator, we get:

So we can divide the shorter length AD in the ratio AD:AF, and this will give us the length AB and (as we already know AD) the diameter of the smaller circle, BD.

To express it more simply and mathematically: AD/AF = AB/AD

Substituting known values for AD and AF, this gives:

AD/AF = AB/AD

(AD^2) / AF = AB

(√2 -1)^2 / (√2 + 1) = AB

Evaluating:

(√2 -1)^2 = 3 - 2 √2 = 0.17157...

and:

(√2 + 1) = 2.4142...

Now: BD (diameter or circle) = AD ('corner' of larger circle) - AB ('corner' of small circle)

Substituting values for AD and AB, and then combining terms over the same denominator, we get:

Having combined all terms over the same denominator, we can now simplify (√2 -1)(√2 +1), since (a+b)(a-b) = a^2 - b^2

BD is the diameter of the smaller circle, BD = 0.216... Comparing this with the diameter of the larger circle, which is 2.00, we can see that the smaller circle is around 10% of the diameter of the larger one. This surprised me - I thought it was larger.

In future posts, I'll look at other arrangements of circles in corners - in particular the quarter-circle in the corner (which, as a repeating pattern, would lead to a smaller circle touching four larger circles in a square-like arrangement), and a third-of-a-circle in the corner of a hexagon. I'll then compare the two arrangements (in terms of space filled) and also check against any known alloys, looking at the ratios of diameters to see if I can find a real-life application.